Most of us judge a tyre by its tread. If there's plenty of rubber left, it must be fine, right? Not always. Tyres age even when they're barely used, and an old tyre with deep tread can be less safe than a newer one that's half worn. Here's how to work out how old your tyres are and when age alone becomes a reason to replace them.
Why tyres age, even when you don't drive much
Tyre rubber is a blend of compounds and oils that keep it flexible and grippy. Over time, heat, sunlight, ozone and simple oxidation break those compounds down. The rubber slowly hardens, loses some of its grip, and becomes more prone to cracking. Australia's strong UV and hot summers can speed this process up, particularly for cars parked outdoors.
That's why low-kilometre vehicles are often the ones with ageing tyres: the weekend car, the caravan, the trailer, the ute that mostly sits in the driveway, and of course the spare tyre that hasn't touched the road in years.
How to find your tyre's date code
Every tyre has a manufacturing date moulded into the sidewall. Look for a string of letters and numbers starting with DOT. The last four digits are the date code:
- The first two digits are the week of manufacture.
- The last two digits are the year.
So a code ending in 2321 means the tyre was made in the 23rd week of 2021. The full code sometimes appears only on one side of the tyre, so if you can't spot it, check the inner sidewall too (a torch helps).
How old is too old?
There's no single legal age limit for tyres in Victoria, and recommendations vary between manufacturers. As a general guide, many tyre and vehicle makers suggest:
- Having tyres inspected regularly once they reach around five years old.
- Considering replacement at around ten years from manufacture, regardless of how much tread is left.
Check your vehicle owner's manual or the tyre maker's guidance for specifics. And remember, age limits are a ceiling, not a target. A tyre that's been run underinflated, overloaded or baked in the sun may need replacing well before then.
Warning signs of an ageing tyre
Whatever the date code says, these signs are worth acting on:
- Fine cracks in the sidewall or between the tread blocks, sometimes called weather checking or crazing.
- Bulges or blisters on the sidewall, which can indicate internal damage.
- Hard, shiny or chalky-looking rubber that feels less pliable than it should.
- Vibration or a change in handling, especially in the wet, where hardened rubber loses grip first.
- Tread separation, where the tread seems to lift or distort. This one needs attention straight away.
Don't forget the spare, the trailer and the caravan
These are the tyres most likely to be old without anyone noticing. A spare can look brand new and still be well over a decade old. Trailer and caravan tyres often sit for months at a time and then get loaded up for a long, hot trip, which is exactly when an aged tyre is most likely to fail. Check the date codes on all of them, not just the four on your car.
Buying tyres? Check the date then, too
New tyres aren't always freshly made, as stock can sit in storage before sale. A tyre that's a year or two old and has been stored properly is generally fine, but it's reasonable to ask about the manufacture date when you buy, especially for vehicles that don't do many kilometres and will keep the same tyres for years.
Simple habits that help tyres last
- Keep tyres inflated to the pressure on your vehicle's tyre placard.
- Park in the shade or under cover where you can.
- Avoid overloading, and adjust pressures for heavy loads as your manual recommends.
- Keep tyres away from fuels, solvents and heat sources if you store them.
- Take a quick look at the sidewalls whenever you check your pressures.
If you're not sure how old your tyres are, or whether that fine cracking is something to worry about, the team at Global Tyres Geelong in North Geelong is happy to take a look and give you an honest opinion on whether they've still got life left in them.
