Most of us only think about the spare tyre when we're stranded on the side of the road. By then it's too late to find out it's flat, perished or missing the tools you need to fit it. A quick check now can save you a long wait for roadside assistance.
Know which type of spare you have
Not every car carries a full-size spare. Check your owner's manual or lift the boot floor to see what you've got:
- Full-size spare: matches your regular tyres and can be used like normal, though it's still wise to get it to a tyre shop soon after.
- Space-saver (temporary) spare: narrower and lighter, designed for short distances at reduced speed only. The maximum speed is usually printed on the wheel or sidewall, often around 80 km/h.
- No spare at all: many newer cars come with a repair kit or run-flat tyres instead. If that's you, know how the kit works before you need it.
Check the pressure every few months
Spare tyres slowly lose air just like the ones on the road, and because we rarely look at them, they're often seriously under-inflated when needed. Space-savers usually require a much higher pressure than regular tyres, often around 420 kPa, so check the placard on the wheel or in your manual rather than assuming it matches the others.
Make it a habit to check the spare whenever you check your regular tyre pressures, or at least every three months.
Look for age and damage
A spare that has never touched the road can still deteriorate. Rubber hardens and cracks over time, especially if it's exposed to heat. Have a look at the sidewalls and tread for cracks, bulges or flaking rubber. Check the four-digit date code on the sidewall: the first two digits are the week and the last two are the year of manufacture. As a general guide, tyres that are many years old should be inspected by a professional, even if they look fine.
Make sure the tools are all there
A good spare is no use without the gear to fit it. Open the boot and confirm you have:
- A working jack and the handle or crank
- A wheel brace that fits your wheel nuts
- The locking wheel nut key, if your wheels have locking nuts (a very common reason people get stuck)
- A torch and a pair of gloves, which make a night-time change far easier
It's also worth confirming you can physically loosen the wheel nuts. They're sometimes tightened far beyond what a hand brace can manage, so try it at home on a calm day rather than on a busy highway shoulder.
Practise changing a tyre once
Changing a wheel is simple once you've done it, but it's surprisingly confusing the first time, particularly in the dark or in the rain. Knowing where the jacking points are and how to lower the car safely makes a big difference. If you do need to change a tyre on the road, pull over as far from traffic as possible, put the hazard lights on, apply the park brake and never get under the car while it's on the jack.
Using a temporary spare safely
If you've fitted a space-saver, remember it's a short-term fix. Keep to the speed limit shown on the wheel, avoid hard cornering and braking, and get your regular tyre repaired or replaced as soon as you can. Handling and stability are affected, particularly in wet conditions, and some cars' traction or stability systems can behave differently with a mismatched wheel.
A little prevention goes a long way
Checking your spare takes about five minutes and costs nothing. If you'd like a hand, the team at Global Tyres Geelong in North Geelong, VIC can check your spare's pressure and condition, help with a tyre fitting, or repair or replace the tyre that caused the trouble in the first place.
